Northwinds Construction

Closner Equipment | 20,993 SF Office, Repair Shop, and Washbay | Elgin, TX

12.12.24 - The foundation is poured and is curing,

12.09.24 - Crews are forming for the foundation pour,

12.05.24 - Crews are pouring piers,

10.23.24 - Site crewmen are bringing in fill for the pad,

10.22.23 - Crewmen continue excavation for the pad,

10.17.24 - Dirt crew started mass grading and excavation for the pad. They will start building the pads for the foundation next week,

9.23.24 - We participated in a ground breaking ceremnony for Closner Equipment. Closner Equipment is a repeat client of Northwinds. We completed their Waller facility in 2023. Closner is a heavy equipment dealer/repair facility that specializes in road work. Closer has selected Northwinds to design and construction their new facility in Elgin, TX. The facility will be built on a six acre tract located on the US 290 frontage. The improvements include 20,993 SF of buildings to include an office, repair shop, and wash bay. The site work will include asphalt, concrete, and a large rock yard.

HTeaO | 2,249 SF | Klein, TX

This project includes a 1,109 SF kitchen, a 1,029 SF mercantile, and 112 SF of storage.

12.12.24 - MEP, interior wall, interior ceiling, and Millwork continue. The drives are poured and the drivethrough equipment installation is underway,

11.26.24 - Millwork and MEP work continue. Canopies and the trash gates are installed,

10.25.24 - Electrical and HVAC continue. Crews are taping and floating the interior. Exterior canopy and light installation are underway,

10.16.24 - Interior drywall continues. Additional driveways were poured,

10.10.24 - Electrical and HVAC continue,

10.01.24 - Masonry work is underway. Interior electrical and buildout continues,

9.24.24 - Doors and windows are installed. Electrical is underway,

9.18.24 -

9.04.24 - Crews are framing the building,

8.06.24 - Framing for a  pavement pour,

8.02.24 - Crewmen are pouring the building foundation this morning,

6.04.24 - Storm and utility work continue,

5.10.24 - Storm and utility work are underway,

4.17.24 - Sitework continues,

4.02.24 - Crews are excavating and clearing the site,

Texas Handcrafted Shutters | 6,000 SF Office/Warehouse Buildout | Katy, TX

11.01.24 - Crews are taping and floating the interior walls. Millwork is underway,

10.17.24 - Crews are building out a 6,000 SF office/warehouse for Texas Handcrafted Shutters. This buildout is within our Katy Commercial Suites.

Scholl Lumber | 32,000 SF Office/Warehouse and 42,000 SF Lumber Canopy | Houston, TX

10.11.24 - Crews have progressed to sheeting the building,

10.03.24 - Erectors are hanging steel as pond work continues,

9.23.24 - The foundation has cured,

9.14.23 - Crews are pouring the building foundation,

9.10.23 - Crews are forming for the foundation pour,

8.14.24 - Storm and sewer work continue. Crews are working on the pond and forming the pad,

8.05.24 - Sitework continues. Prepping for the future pad.

6.28.24 - The walls have cured,

6.20.24 - Crews continue to work on the fencing and the pond,

6.10.24 -

6.08.24 - Working on the fence,

6.06.24 - Building forms,

This project consists of a 32,000 SF office/warehouse combination with a 2nd floor mezzanine and office area. Phase II construction will consist of a 42,000 SF lumber canopy.

YHS Automotive| 2,560 SF PEMB | Houston, TX

YHS Automotive is a new project located in Katy, TX. The 2,560 SF building will serve as additional service bays for YHS to perform services for its customers. The building is a single slope pre-engineered metal building with two large overhead doors, fully insulated/airconditioned and brick wainscot. The scope includes the demolition of existing paving, reworking the drainage, and pouring new site paving.

9.21.24 - The foundation is fully poured and curing,

9.20.24 - Crews are prepping for the foundation pour,

9.18.24 - Crewmen are pouring the piers,

9.11.24 - 

8.26.24 - The demo is underway,

Mid-South Control Line | 7,150 SF Warehouse | Houston, TX

This project includes a 7,150 SF single slope warehouse, with three overhead bay doors, liner panel, a fully insulated roof and fully insulated walls.

9.16.24 - The foundation was poured this morning and is curing,

9.13.24 -  Crews are forming the pad for the foundation pour,

9.10.24 - Crewmen are pouring piers,

8.26.24 - Crewmen are pouring the truck well walls,

8.14.24 - Crewmen are pouring the loading dock,

O'Neills Inflight Catering | 10,000 SF Interior Demo and Remodeling | Houston, TX

8.23.24 - Fire inspections are underway. The epoxy flooring is complete,

8.19.24 - Kitchen equipment installation and electrical trim out work continues,

8.13.24 - Kitchen work continues. The warehouse is clean and epoxy flooring will follow.

8.09.24 - Sign installation is underway. The kitchen is nearing completion,

8.07.24 - Kitchen equipment installation continues,

8.06.24 - Electrical work continues, flooring is nearing completion, the exterior canopy is installed,

7.30.24 - Parking curbs are installed, flooring continues, and restroom partition installation is nearing completion,

7.26.24 - Flooring continues,

7.22.24 -

7.17.24 - Painting continues,

7.16.24 -

7.12.24 - Lights are on,

7.10.24 -

7.02.24- Inspections are complete and requirements are met, so ceiling tile installation and final clean will follow,

6.28.24 - Kitchen equipment arrived, restroom partitions are in place, and the final painting is complete,

6.17.24 - Tile installation is underway,

6.10.24 - Exterior trim is complete. Ceiling grid installation is complete. Electricians trim out the interior,

5.08.24 - Crews are taping, floating, and sanding interior walls,

4.26.24 - Plumbers are roughing in the plumbing as additional crews begin sheetrocking the interior walls,

3.01.24 - Warehouse steel painting is complete. Crews are currently installing the insulated metal wall panels, 

2.01.24 - Interior buildout demolition continues,

12.04.23 - MEP interior demolition is underway, 

 This project includes the renovating of an existing 10,000 SF warehouse for commercial kithcen use.

SiteOne Friendswood Expansion | 12,000 SF | Friendswood, TX

1.23.24 - This project is complete,

12.14.23 - M&M Erectors continue to sheet the building,

11.29.23 - The paving was poured this morning and erectors are hanging steel,

11.03.23 - The slab is poured for the new 12,000 SF expansion of their Friendswood location. The concrete crew is laying out the paving and the erectors will begin hanging steel next week.

Traders Village Houston | PEMB | Houston, TX

1.18.24 - This project is complete,

12.19.23 - The steel is erected and crews are making fast progress sheeting the building,

Mid-South Control Line | Building Addition | Houston, TX

10.26.23 - 

10.25.23 - 

9.25.23 - Crews are installing liner panels and are trimming the building,

9.13.23 - Crews are hanging the pre-assembled roof sections,

9.07.23 - The pad is cured and sawcut,

9.02.23 - Crews are pouring the foundation,

8.29.23 - Drilling and pouring piers,

8.14.23 - Setting storm drains,

SiteOne | 7,000 SF PEMB | Friendswood, TX

12.09.19 - This project was completed in November and SiteOne is moving in,

10.14.19 - Interior painting is underway and landscaping installation will soon follow,

9.27.19 - Painters are wrapping up. Site crew is cleaning up the site. The building should have power next week,

9.09.19 - Crews are tying steel in preparation for Wednesday's paving pour,

8.19.19 - The building is fully sheeted and trimmed. Downspouts are installed and the side canopy. Interior framing is underway,

8.09.19 - M&M Erectors continue to sheet the roof. Site crewmen are grading for paving,

7.23.19 - Crewmen are erecting the building,

7.10.19 - Crews are tying steel for tomorrow morning's pour,

6.28.19 - Sitework continues,

6.26.19 - Crews broke ground on this project last week. It will be a new 7,000 SF retail center and showroom for a wholesale landscape and irrigation supplier SiteOne. Trevor Robinson is the PM.